Capacity 0 to 50 Tonnes
Maximum
Operating working Pressure 10,000 psi/700 Bar
Design
pressure 700 bars.
Alloy
steel hydraulic cylinder - hardened & tampered, hard chrome plated &
honed to fine finish.
Alloy
steel piston - hardened & tampered, hard chrome plated, ground.
End
Connection 3/8" NPT female (coupler half female optional extra)
Specified
shut height & stroke controlled within +/- 3mm
Hydraulic Hand PumpHydraulic
hand hump with heavy-duty construction with hardened and ground piston,
renewable suction, delivery relief and release valve parts.
Usable
displacement/stroke at rated pressure2.8cc.
Integral
reservoir of adequate oil capacity.
Automatic
safety valve to cut the pressure at set pressure.
Provision
to connect pressure gauge, if required.
Hand Pump
SpecificationMHHP-91-
Single speed, discharge/stroke 2.8cc, total reservoir capacity 1.8 liters,
usable capacity 1 liters approx.
MHHP-151-Single
speed, stroke 2.8cc, total reservoir capacity 2.2 liters, usable capacity
1.8 liters approx.
MHHP-202-Two
stage, output/stroke up to 30 bar 53 cc, output/stroke above 30 bar 2.8cc,
total reservoir capacity 3 liter, usable capacity 2 liter approx.
MHHP-402-Two
stage, output/stroke up to 30 bar 53 cc, output/stroke above 30 bar 2.8cc,
total reservoir capacity 5 liter, usable capacity 3.5 liter approx.
Hydraulic
HoseIndustrial multilayer hose with 700-bar Maximum Working
Pressure with 3/8" NPT Male connection at both end along with spring
guards. Burst pressure tested to 1500 bars minimum.
Pressure
Gauge (Optional)Pressure Gauge 0-980 Bar glycerine filled with
stand pipe with end fittings.
All the hoses & quick coupler are
of the European origin.
SPECIFICATIONS
Capacity 75 to 250 TonnesMaximum
Operating working Pressure 10,000 psi/700 Bar
Design
pressure 700 bars.
Alloy
steel hydraulic cylinder - hardened & tampered, hard chrome plated &
honed to fine finish.
Alloy
steel piston - hardened & tampered, hard chrome plated, ground.
End
Connection 3/8" NPT female (coupler half female optional extra)
Specified
shut height & stroke controlled within +/- 3mm
Hydraulic Hand PumpHydraulic
hand hump with heavy-duty construction with hardened and ground piston,
renewable suction, delivery relief and release valve parts.
Usable
displacement/stroke at rated pressure2.8cc.
Integral
reservoir of adequate oil capacity.
Automatic
safety valve to cut the pressure at set pressure.
Provision
to connect pressure gauge, if required.
Hand Pump
SpecificationMHHP-91-
Single speed, discharge/stroke 2.8cc, total reservoir capacity 1.8 liters,
usable capacity 1 liters approx.
MHHP-151-Single
speed, stroke 2.8cc, total reservoir capacity 2.2 liters, usable capacity
1.8 liters approx.
MHHP-202-Two
stage, output/stroke up to 30 bar 53 cc, output/stroke above 30 bar 2.8cc,
total reservoir capacity 3 liter, usable capacity 2 liter approx.
MHHP-402-Two
stage, output/stroke up to 30 bar 53 cc, output/stroke above 30 bar 2.8cc,
total reservoir capacity 5 liter, usable capacity 3.5 liter approx.
MHHP-502-Two
stage, output/stroke up to 30 bar 53 cc, output/stroke above 30 bar 2.8cc,
total reservoir capacity 8 liter, usable capacity 5 liter approx.
MHHP-1002-
Two stage, output/stroke up to 30 bar 53 cc, output/stroke above 30 bar
2.8cc, total reservoir capacity 13 liter, usable capacity 10.0 liter approx.
Hydraulic HoseIndustrial multilayer hose with 700-bar
Maximum Working Pressure with 3/8" NPT Male connection at both end
along with spring guards. Burst pressure tested to 1500 bars minimum.
Pressure
Gauge (Optional)Pressure Gauge 0-980 Bar glycerine filled with
stand pipe with end fittings.
All the hoses & quick coupler are
of the European origin.
SPECIFICATIONS
Plain Ram (Load Assisted - Tension Spring Return)
