1. Interchangeable Puller Set Part No. MPM-2000 B
This set has been designed with interchangeable concept so as to handle variety of general puling jobs. The standarised component housed in a study steel box permit the puller to be assembled as 2 jaw & 3 jaw pullers equally suitable for internal as well as external jobs. The reach can be increased by use of extensions. A set of 4 step bushes are also included in the above puller.

Set consist of
MPM-2001 Pressure Screw Rod
MPM-2002 Two Jaw Cross Head
MPM-2003 Tommy Bar
MPM-2004 Jaws for internal pulling (3 nos)
MPM-2005 Jaws for external pulling (3 nos)
MPM-2006 Support plate for jaws.
MPM-2007 Short replaceable centre point
MPM-2008 Long replaceable centre point
MPM-2009 Side arm for extension (3 nos)
MPM-2012 Collar
MPM-2013 Step Bush (26 x 34)
MPM-2014 Step Bush (30 x 40)
MPM-2015 Step Bush (37 x 49)
MPM-2016 Step Bush (47 x 53)
MPM-2020 M-10 Long Bolts (3 Nos)
MPM-2024 M-10 Short Bolts (3 Nos)
MPM-2023 3 Jaw Cross Head
Steel Box

2. Interchangeable Puller Set Part No. MPM-104 B
This set has been designed as medium duty general purpose puller set suitable for a variety of jobs requiring a pulling force upto 10 tonnes maximum. The set consists of 2 Jaws, 3 Jaws and bar type attachment in steel box for making either MPM-101 or MPM-102 or MPM-103 pullers listed earlier.

BOLT GRIP PULLER
This puller set is ideal for pulling items, such as fly wheels, pulley & gears with tapped holes. The set includes a 4 position 2/3 jaws yoke along with 100/150 mm long, M-12 BOLT. An assortment of blank adaptors is also included for pulling items with thread size other than M-12.

Set Contains
2/3 jaw yoke (1 No.)
Screw rod with tommy bar (1 No.)
M-12 x 100 mm bolts (3 No.)
M-12 x 150 mm bolts (3 No.)
M-12 x 8 mm, 10 mm & 1/2" blank adaptor (2 No.)
Steel Box (1 No.)

N.B. Reach can be extended with longer bolts.

STUD EXTRACTOR
Suitable for removal and insertion of studs.

Note: Design subject to revision due to constant improvement.