Maximum Operating working Pressure 10,000 psi/700 Bar
Design pressure 700 bars.
Alloy steel hydraulic cylinder - hardened & tampered, hard chrome plated & honed to fine finish.
Alloy steel piston - hardened & tampered, hard chrome plated, ground.
End Connection 3/8" NPT female (coupler half female optional extra)
Specified shut height & stroke controlled within +/- 3mm

Hydraulic Hand Pump
Hydraulic hand hump with heavy-duty construction with hardened and ground piston, renewable suction, delivery relief and release valve parts.
Usable displacement/stroke at rated pressure2.8cc.
Integral reservoir of adequate oil capacity.
Automatic safety valve to cut the pressure at set pressure.
Provision to connect pressure gauge, if required.

Hand Pump Specification
MHHP-91- Single speed, discharge/stroke 2.8cc, total reservoir capacity 1.8 liters, usable capacity 1 liters approx.
MHHP-151-Single speed, stroke 2.8cc, total reservoir capacity 2.2 liters, usable capacity 1.8 liters approx.
MHHP-202-Two stage, output/stroke up to 30 bar 53 cc, output/stroke above 30 bar 2.8cc, total reservoir capacity 3 liter, usable capacity 2 liter approx.
MHHP-402-Two stage, output/stroke up to 30 bar 53 cc, output/stroke above 30 bar 2.8cc, total reservoir capacity 5 liter, usable capacity 3.5 liter approx.
MHHP-502-Two stage, output/stroke up to 30 bar 53 cc, output/stroke above 30 bar 2.8cc, total reservoir capacity 8 liter, usable capacity 5 liter approx.
MHHP-1002- Two stage, output/stroke up to 30 bar 53 cc, output/stroke above 30 bar 2.8cc, total reservoir capacity 13 liter, usable capacity 10.0 liter approx.

Hydraulic Hose
Industrial multilayer hose with 700-bar Maximum Working Pressure with 3/8" NPT Male connection at both end along with spring guards. Burst pressure tested to 1500 bars minimum.

Pressure Gauge (Optional)
Pressure Gauge 0-980 Bar glycerine filled with stand pipe with end fittings.

All the hoses & quick coupler are of the European origin.

SPECIFICATIONS